The SW-1001-HDBT multi-format HDBaseT presentation switcher enables the connection and switching of up to 6 HDMI, 1 Display Port, 1 HDBaseT and 2 VGA sources with embedded audio onto the output signal for the VGA sources with an internal scaler ensuring instant source switching by matching the resolution of the display device up to 1920x1200p.
Featuring adjustable microphone inputs with selectable phantom power able to be mixed with the source audio and sent via the line-level output, the SW-1001-HDBT includes both HDMI output for local connection or HDBaseT output for transmission over distances up to 100m/328ft, along with PoH, Ethernet and control all sent to a WyreStorm RX-70-4K receiver (sold separately).
- Allows up to ten multiformat inputs to be switched to two mirrored outputs
- 6 HDMI, 1 DisplayPort, 1 HDBaseT IN and 2 VGA audio source inputs to duplicate HDBaseT and HDMI outputs
- Fast, seamless switching between HDMI and VGA inputs
- Local mirrored HDMI output and HDBaseT output with transmission distance up to 100m/328ft to compatible display receiver
- PoH on HDBT IN and OUT remotely powers HDBaseT Transmitter and Receiver to eliminate local power access at either location
- Features fast, seamless switching between HDMI and VGA inputs with QuickSync technology
- Supports input resolution up to 1920x1200@60Hz
- Unit remembers the connected sequences of each input - follows the Last-In-First-Out rule, always outputting the most recently connected active source
- Auto-scaler outputs the most suitable resolution for connected devices from 640x480@60Hz to 1920x1200@60Hz based on the display device EDID as well as different fixed resolutions for selections
- Follows Last-In-First-Out rule: always outputting the most recently connected active source
- Dual microphone inputs with phantom power supporting dynamic or condenser mics
- 1 x stereo audio input and 1 x auto mix stereo audio output
- Features audio embedding and de-embedding - VGA source embedded with corresponding stereo audio for A/V input with audio extracted from A/V output when switching
- Multiple control methods: front panel buttons for source selection, LAN (Telnet & Web GUI) for device control and management and RS232 for device control, debugging and power control
- Bi-directional IR and RS232 passthrough over HDBaseT output allows control of devices connected to a HDBaseT receiver over distances up to 100m/328ft from central or remote locations
- CEC compatibility to enable CEC-enabled devices such as TVs enter standby mode and return to their normal working state without user intervention - functionality also possible via rear panel RS232
- Supports multiple communications protocols such as IP, TCP, Telnet, UDP
- 3 year warranty
- Includes
- 1 x SW-1001-HDBT 10x1 HDBaseT Presentation Switcher with 2-Mic Control and CEC
- 1 x Power supply (100~240V AC)
- 2 x Phoenix Connector (Male, 3.5 mm, 4 pins)
- 4 x Phoenix Connector (Male, 3.5 mm, 3 pins)
- 5 x Phoenix Connector (Male, 3.5 mm, 5 pins)
- 2 x Mounting brackets
- 1 x Quickstart guide (Quickstart and full manual also available to download from this product page)
