The PL-10 adds to the extensive range of remote control devices available for the iDR-4 and iDR-8 audio mix processor systems. It offers an alternative to the PL-6 fader controller with the advantage that user settings can be stored and recalled without the need to physically move the controls to the new settings. The PL-10 is part of the Allen & Heath PL Series of wall plates and remote controllers. It can be mounted into a plinth or custom furniture, or used free standing. Template cutting details are provided for custom application. The PL-10 interfaces with the Allen & Heath PL-Anet serial port. Multiple PL-10 units can be daisy chained together along with other PL-Anet devices using CAT5 cable. A terminator is provided for plugging into the last unit in the chain. The PL-10 control and indicator functions are programmed using the iDR System Manager software. Space is provided next to the controls for custom labelling. The PL-10 is ideal as a remote mix controller, for example as a simple operator controlled mix panel in an installed sound system, or as a personal musicians on-stage mix controller for in-ear monitors. The installer can program the unit according to the requirements of the application, providing the degree of control needed by the day to day operator. 8 Rotary Encoders can be configured individually for continuous input, output, group, crosspoint level control or monitor level. Minimum and maximum ranges can be set. Each rotary encoder has 8 LEDs displaying the control position. 16 Switches, arranged as two per rotary encoder, can be configured as combinations of level up/down, mute toggle, polarity toggle, audio monitor select, or preset recall. 24 LED indicators, arranged as three per fader, can be configured as combinations of 3 colour signal meters, mute status, channel on indication, level sensing or preset related 3 colour LED indication. Controls can be disabled if not required. A single 3 colour Status LED displays PLAnet power and communication status. Custom labels can be fitted into the recessed areas provided (13 x 7mm). Recommended label height is 6mm.
