Microphones : Headworn Microphones : Audio-Technica U.S., Inc. - BP892C

MicroSet Omnidirectional Condenser Headworn Microphone with 55" Unterminated Cable

Model: BP892C

Handles high sound pressure levels with ease
Extremely intelligible natural audio
Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
Ideal for applications requiring minimum visibility
Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

MicroSet omnidirectional condenser headworn microphone with 55" unterminated cable. BP892 subminiature omnidirectional condenser headworn microphone, less power module. 1.4 m (55") permanently attached miniature cable, unterminated. Includes AT8440 cable clip, AT8464 dual-ear microphone mount, two AT8157 windscreens, two AT8156 element covers, a moisture guard and a carrying case.

Handles high sound pressure levels with ease
Extremely intelligible natural audio
Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
Ideal for applications requiring minimum visibility
Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure
Comfortable fit with or without glasses
Comes equipped with AT8464 dual-ear microphone mount
Converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
Fixed-charge back plate, permanently polarized condenser element
Flat, roll-off (wired only) switch

Headset Mic Type - Condenser
Microphone Connectivity - Wireless
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Warranty - Yes
Spec Sheet available - Yes

Certifications: FCC
Cable Length: 1.40 m
Cable Length: 140 cm
Maximum Frequency Response (Bandwidth): 20,000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Maximum SPL (Sound Pressure Level): 135 dB
Sensitivity: -49 dB
Signal to Noise Ratio: 63 dB
Product Weight: 0 kg
Warranty (Length/Type): 2 Years Limited End-User
Open Circuit Sensitivity: -49 dB (3.5 mV) re 1V at 1 Pa
Current Consumption: 0.10 mA typical at 5V (wireless only)
Voltage Range: 2.5 to 11 V (wireless only)
Weight (Power Module): 85 g (3.0 oz) (wired only)
Dimensions:
- Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
- Boom: 98.4 mm (3.87") long, 1.07 mm (0.04") diameter
Cable: 1.4 m (55"), unterminated
Accessories Furnished:
- BP892c: AT8440 cable clip; AT8464 dual-ear microphone mount; two AT8157 windscreens; two AT8156 element covers; moisture guard; carrying case
- BP892c-TH: AT8440 cable clip; AT8464-TH dual-ear microphone mount; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; carrying case
AUDIO-TECHNICA CASE STYLE: M31

Headworn Microphone 549 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Omni 2-sided Low Profile Headworn Microphone with Telex TA4F Connector, Beige

by Electro Voice

Unidirectional headband microphone

by Williams AV

Sennheiser ME 3 Headmic with Cardioid Capsule

by Sennheiser