The ES915C is a gooseneck microphone, ideal for applications where quality sound and flexible performance are imperative. This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance. Equipped with Audio-Technica’s legendary electro-acoustic design innovations, The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES915C12 also offers an 80Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform cardioid polar pattern with 120° acceptance angle. The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface.
- Fixed-charge back plate, permanently polarized condenser
- Cardioid polar pattern
- 30 to 20000Hz frequency response
- 250 ohms impedance
- 138dB SPL
- 65dB, 1kHz at 1Pa signal-to-noise ratio
- Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
- Low-profile element provides uniform cardioid polar pattern with 120° acceptance angle
- Plugs into any standard XLRF-type connector, or direct mounts to 5/8"-27 stands using included thread-mount adapter
- Included low-profile isolation mount attenuates noise, shock and vibration
- Available interchangeable elements permit angle of acceptance from 90° to 360°
- Small-diameter, alternating gooseneck design permits highly flexible positioning
- Superior off-axis rejection for maximum gain before feedback
- Requires 11V to 52V DC phantom power
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep® filter provides steep low-frequency attenuation to improve sound pickup without affecting voice quality
- RoHS compliant
- Accessories:
AT8109 two-stage foam windscreen
AT8474 universal isolation mount
AT8473 quick-mount stand adapter
5/8”-27 to 3/8”-16 threaded adapter
