hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production & Lighting
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Black Box  - MT242A-F

G.703 Balun, 75-120-ohm, 2.048 Mbps, Female

Model: MT242A-F

  • Solve mismatches between coax and twisted-pair equipment.
  • Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.
  • Converts bidirectionally between G.703 balanced and unbalanced interfaces.
  • Make bidirectional G.703 balanced and unbalanced conversions and protect against ground loops.
  • Features transformer isolation for protection against ground loops.
Compare
Project List
Product Info

G.703 7-120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75-120-ohm Adapters to connect your G.703 network to your shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.

Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.

The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 - 120-ohm High-Speed Adapters support data rates to 8 Mbps.

These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.

Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too.

Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.

The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors.

The G.703 75-120 High-Speed Adapters support data rates to 8 Mbps.

  • Solve mismatches between coax and twisted-pair equipment.
  • Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.
  • Converts bidirectionally between G.703 balanced and unbalanced interfaces.
  • Make bidirectional G.703 balanced and unbalanced conversions and protect against ground loops.
  • Features transformer isolation for protection against ground loops.
  • Choose from models that support 2.048-Mbps or 8-Mbps speeds.
  • 2.048-Mbps models can be ordered with 1.6/5.6 dual-coax connectors.
 
 

Suggested Products