Lighting control dimmer module provides 8 channels of dimming for 230V incandescent, magnetic low-voltage, neon/cold cathode and dimmable 2-wire fluorescent loads. It is actually composed of two independent 4-channel dimmers in a single module. Each channel is rated for 2300W, with a total module rating of 5980W when fed from two separate 16A feeds. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module. CLXI-series dimmers are rigorously built using 40A triacs and oversized heat sinks for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.
- Button setup is used for manual channel activation and TSID
- Green LED indicators indicates line power is applied to LINE terminal
- Yellow LED indicators indicates communication with control system
- Red x4 LED indicators indicates state of each channel
- Red LED indicators indicates unit is in setup/manual mode