The 7703DA8A-RF-LNB-B50 1x8 Active Splitters provide amplification and distribution of RF signals from 40MHz to 3GHz. They handle any RF input modulation format and provide 8 isolated outputs for further signal distribution. Typical applications include amplification and distribution of 950MHz-2150MHz L-Band and 70MHz-140MHz IF signals. Monitoring of RF input power, card status and control of gain/attenuation is provided remotely via VistaLINK® capability on the this versions. Optional LNB power is available at the input connector on the this versions. The 7703DA8A-RF-LNB-B50 occupy two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Low noise amplification and distribution of RF signals from 40MHz to 3GHz
- Wideband frequency response for use with L-Band, 70/140MHz IF and off-air DTV signals
- Wide dynamic range (-10 to -60dBm)
- Output gain of -10dB to +20dB adjustable in 1/2dB steps
- AGC mode with adjustable target level
- Protocol independent - handles all modulation formats
- Input RF signal strength monitoring
- Fully hot-swappable from front of frame
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Optional LNB power (@ +13 or +18V DC with built-in current limiting) and 22kHz tone for LO control on 7703 versions
- 7703-LNB versions include LNB current monitoring with adjustable alarm thresholds for monitoring LNB health
