The 7707ADVT13 Analog or SDI Video & 4 Analog or 4 AES Audio Fiber Transmitter, 1310nm Laser. Single card fiber optic transmitter for one composite Analog or SDI video and four analog or AES audio signals.
Single card fiber optic transmitter for one composite Analog or SDI video and four analog or AES audio signals
Auto-sensing (analog or digital) video and audio inputs
Supports both NTSC and PAL analog or 4:2:2 component digital video
Supports Analog to Digital and Digital to Analog audio conversion
Broadcast quality analog video and audio performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
Supports 32, 44.1, 48kHz AES audio inputs
Dolby E compatible
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®.
Audio de-embedding capability for digital video and Analog or AES Audio
-NF version converts input video & audio to a 270Mb/s copper output to interface with any SD-SDI or other 270Mb/s service
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Adjustable gain equalization for analog video for up to 250m of Belden 1694A coaxial cable
Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths at 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU G 694.2 compliant)
DWDM wavelengths also available (ITU G.694.1 compliant)
Outputs available with fiber optics and BNC or BNC's only (-NF version)
Passes embedded and/or external audio for digital video
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Analog Video Input Standard:
NTSC (SMPTE ST 170), PAL (ITU-R 624-2)
Analog Video Input Number of Inputs:
1
Analog Video Input Connector:
BNC per IEC 61169-8 Annex A
Analog Video Input Signal Quantization:
12 bits
Analog Video Input System Bandwidth:
> 5.5MHz
Analog Video Input Level:
2V p-p (maximum)
Analog Video Input Gain Equalization:
Up to 250m of Belden 1694 or equivalent (adjustable)
Analog Video Input Impedance:
75 ohm
Analog Video Input Return Loss:
> 30dB to 5.5MHz
Analog Video Input SNR:
> 70dB
Analog Video Input Differential Gain:
< 1.0%
Analog Video Input Differential Phase:
< 0.7°
Analog Video Input Passband Ripple:
Active Power:
15 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)