Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s. Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s. Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s).
- Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
- Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
- Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
- Automatic cable equalization to 300m at 270Mb/s and 75m at 1.485Gb/s with Belden 1694A (or equivalent) cable
- Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
- High density - accommodates up to 45 independent channels of optical conversion, in a single 3RU frame
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK capability
- Detection and display of input cable length
- Operation with multi-mode or single-mode fiber
- SC/PC, ST/PC or FC/PC connector options
- Tally output on Frame Status bus upon loss of input signal
- VistaLINK capable for remote monitoring via SNMP (using VistaLINK PRO) when installed in 7800FR frame with a 7700FC VistaLINK frame controller
