SDI with 2 unbalanced AES audio fiber transmitter.
SDI video and 2 AES audio fiber optic transmitter
Supports 270Mb/s on 525 or 625 line 4:2:2 component SDI and SDTi (SMPTE ST 305) video signals
Supports 32, 44.1, 48kHz AES audio inputs
Dolby-E™ compatible
AES audio inputs can be synchronous or asynchronous to each other and/or to input video
Reclocked SDI output for additional signal distribution or monitoring
Signal transport over fiber uninterrupted by loss of SDI or AES audio input feeds
Low audio to video latency over transport interface
Local display of input SDI signal strength, video format, and EDH errors
Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
Automatic coaxial input equalization up to 300m at 270Mb/s (Belden 1694)
Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single-mode and multi-mode fiber optic cable
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Audio
Fiber Optic Signals Supported - HD Component Video