Signal Routing / Switching : Switchers : Kramer Electronics - VP-411DS

4x1 Computer Graphics Video & Stereo Audio Standby Switcher

Series: Main

Model: VP-411DS

Part #: 51-70654190

High Bandwidth - 300MHz (-3dB)
Looping Input - Input 1
Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
Primary Input - Selectable

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The VP-411DS is a high-performance switcher for computer graphics video signals, with-resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. When configured as a standby switcher, the switching priority can be set for each of the four inputs.

High Bandwidth - 300MHz (-3dB)
Looping Input - Input 1
Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
Primary Input - Selectable
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), contact closure, & IR remote (included)
Output Disconnect
Front Panel Lockout
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with an optional RK-1 rack adapter

Rackmountable - Yes
Supported Resolution - UXGA (1600x1200)
Switcher Audio Input Signal Type - Stereo Audio
Switcher Connector Type - Other
Switcher Type - Audio
Switcher Type - Computer
Switcher Type - Video
Switcher Video Signal Supported - Component
Warranty - Yes
Spec Sheet available - Yes

Number of Inputs: 4
Number of Outputs: 1
Current Draw: 0.23 Amps
DC Voltage: 12 Volts
Depth: 162.56 mm
Height: 43.18 mm
Width: 214.88 mm
Product Weight: 1.10 kg
Inputs: 4 UXGA with loop on IN 1 on 15-pin HD connectors, 4 unbalanced stereo audio with loop on IN 1 on 3.5mm mini jacks
Outputs: 1 UXGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack
Max. Output Level: VIDEO: 1.8Vpp
AUDIO: 7.2Vpp
Bandwidth (-3dB): VIDEO: 300MHz
AUDIO: >40kHz
Diff. Gain: 0.03 %
Diff. Phase: 0.06 deg
K-Factor: <0.05 %
S/N Ratio: VIDEO:73dB @5MHz
AUDIO: 93dB
Crosstalk (All Hostile): VIDEO:–50dB
AUDIO: –72dB @1kHz
Controls: Input selector; PANEL LOCK and OFF pushbuttons; IR remote control reception window; connector for extended IR reception; RS-232 connector; contact closure terminal block for external wire switching; input priority selector DIP-switches; normal/Kr-isp® and program/normal mode selectors via slide switches on the underside
Coupling: VIDEO: DC
AUDIO: DC
Audio THD + Noise: 0.004% @1kHZ
Audio 2nd Harmonic: 0.002% @1kHZ
Accessories: Power supply, IR remote control
Options: RK-1 19" rack adapter, external remote IR receiver cable
Input Signal Types: Computer Graphics Video
Output Signal Types: Computer Graphics Video
Rack Units (Height): 1
Regulatory Compliance: WEEE

Datasheet for 4x4 XGA & (B) Audio Matrix Switcher with Delayed Switching 1634088 kb - Other

Project List

Standby Switcher 200 kb - Data Sheet

Project List

Switcher 904 kb - Other

Project List

Find a Dealer

Find a Distributor

Suggested Products

4K 4×1 Multi-Format Wireless Collaboration Switcher with Wired and Wireless Connectivity

by Vanco International

HDMI 6x1 Selector Switch/Scaler 1080p (Inputs: 4-HDMI, 2-VGA Output: HDMI, Audio Breakout, RS232, IR)

by Vanco International

4K HDMI USB KVM Switch: 16-Port

by Network Technologies Inc. (NTI)