Power Distribution : Power Sequencer & Power Control Devices : Lowell - SEQR-8K

8-step Low Voltage Rackmount Sequencer, Key Switch

Series: SEQ

Model: SEQR-8K

Sequential power control allows connected equipment to be turned on/off in time delayed order up to 8 steps.
Rear programmable dip switch for Alternate Sequence Mode operation
Alternate Sequence Mode allows selected outputs to be bypassed for partial system operation (eg. rehearsals). Set ‘Sequence Step Bypass’ termination block on or off for each of the eight steps. Install separate ASM style remote switch to activate alternat
Alarm Interface: Integral override facilitates use in life safety applications where fire code mandates an alarm interface.
LEDs provide visual status of connected equipment

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Eight step rackmount sequencer in 1U chassis provides time delayed activation and deactivation of equipment with full or alternate sequence mode (ASM). Typically used in conjunction with Lowell’s Remote Power Controls (RPC Series) and switches (RPS Series).

Sequential power control allows connected equipment to be turned on/off in time delayed order up to 8 steps.
Rear programmable dip switch for Alternate Sequence Mode operation
Alternate Sequence Mode allows selected outputs to be bypassed for partial system operation (eg. rehearsals). Set ‘Sequence Step Bypass’ termination block on or off for each of the eight steps. Install separate ASM style remote switch to activate alternat
Alarm Interface: Integral override facilitates use in life safety applications where fire code mandates an alarm interface.
LEDs provide visual status of connected equipment
Front adjustable delay allows .5-10 seconds between steps.
Steel chassis: 19"W x 1.75"H x 9"D. Black.
Eight barrier strip control outputs
Each of the eight control outputs includes switch contacts for connection to remote power control-activated equipment and auxiliary dry contacts for the sequential activation of accessory systems such as projector screens, etc. To sequentially activate RP

Warranty - Yes
Spec Sheet available - Yes

Rackmountable: Yes
Number of Sequence Events: 8
Colour: Black
Current Draw: 0.50 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Depth: 228.60 mm
Height: 44.45 mm
Wireless: No
Warranty (Length/Type): Limited
Product Weight: 5.44 kg
Width: 482.60 mm

2199-SEQR8K.pdf 706549 kb - Data Sheet

Project List

Suggested Products

Xtend XPC Standalone Power Controller

by LynTec, Inc.

60A 2-pole Bolt-on Un-motorized Circuit Breaker

by LynTec, Inc.

3-phase 4-wire 120V Modular Sequencing Load Center with 41 Circuits, 24 Sequences, Main Lug

by LynTec, Inc.