Small Enterprise Environment Monitoring System, Back-up Battery

• Systems Controlled - Other
• Warranty - Yes
• ROHS Compliant - Yes
• Spec Sheet available - Yes

• RJ45 Sensor Ports: Two female RJ45 jacks for connecting NTI temperature, humidity, liquid detection, smoke detection, glass break, vibration, motion sensors, and more. Two levels of user-defined alerts – non-critical and critical. Provides +12 VDC, 100 mA for each port.
• Dry Contact Closures: Five screw terminal pairs for connecting dry contact devices and the liquid detection sensor. Potential-free. Output voltage: +5 V DC. Current limited to 10 mA. Maximum resistance to close contact: 300K Ohm.
• Output Relay: One screw terminal pair. Potential-free relay switch contacts. Normally open / normally closed connection points. Maximum switching load: 0.5A at 100VAC, 1A at 30VDC, 0.5A at 48VDC.
• USB Ports: Two female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive. One female USB Type B connector for connecting a PC for serial terminal access.
• Ethernet Port: One female RJ45 connector. 10/100 Base-T Ethernet interface. Supports full- and half-duplex.
• Aux Power: One screw terminal pair. Provides +12 VDC, 500 mA.
• Optional Back-Up Battery: Rechargeable sealed lithium battery. Provides back-up for two hours.
• Protocols: HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, TLS v1.2, LDAPv3, XOAUTH2, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0, RADIUS Support for XOAUTH2 provides higher security authentication for email accounts (e.g. Gmail). Compatible with any SNMP management software. The unit can be polled via SNMP. Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB serial interface. An IP address can be assigned to the E-2D automatically by a DHCP server. Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem). Alerts are posted in event log, which is accessible through Web user interface. Email alerts can be sent to 17 addresses. Supports HTTP REST API to poll sensor data with response in JSON format.
• Dimensions: WxDxH: 5.82x3x1.75 in (148x76x44 mm). Optional 1RU rackmount kit available(E-RK1-2D). The ENVIROMUX system can be mounted so that the sensor connectors are facing the front or back of the rack.
• Power: Dual DC power. If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the optional battery backup. 100 to 240 VAC at 50 or 60 Hz via AC adapter. Includes one country-specific AC adapter. The second AC adapter is sold separately. Power consumption: 10W. Use the PWR-48V-12V1-6A DC-DC power converter to install the E-2D in a 48V or 24V Telecom environment.
• Environmental: Operating temperature: 32 to 140°F (0 to 38°C). Storage temperature: -22 to 140°F (-30 to 60°C). Operating /Storage Relative Humidity: 17 to 90% non-condensing RH.
• Regulatory Approvals: CE, RoHS. EN51055, EN50121-3-2.
• Warranty (Length/Type): Two years.
• Operating Temperature (Maximum): 60 C
• Operating Temperature (Minimum): 0 C
• Certifications: CE, RoHS
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 100 Volts
• Depth: 76.20 mm
• Height: 44.45 mm
• Width: 147.83 mm
• Regulatory Compliance: CE, RoHS
• MTBF: 230,693 hours.

E-RK1-2D
1RU Rackmount Kit for E-2D & E-MINI-LXO

E-RK1-2DDI16DOR16
1RU Rackmount Kit for Mounting E-2D and E-DI16DOR16-V2 Side By Side

E-SLDO-IP68
IP68 Submersible Spot Liquid Detector

E-APP-ANROID
Enterprise Server Environment Monitoring System Android App