Environment Monitoring System Vibration & Glass Break Sensors
Motion / Intrusion / Vibration Sensors compatible with E-2D, E-5D and E-16D
For more information, visit http://www.networktechinc.com/vibration-glass-break-sensor.html
- Detects when individuals climb over or cut through chain link or wire mesh fences.
- Advanced built-in signal processor prevents false alarms.
- Four sensitivity settings to tune each sensor to a particular fence section and intrusion type.
- Two open-collector outputs – alarm and power failure
- UV resistant case and epoxy sealed electronics provides maximum resistance to harsh environments.
- Rated NEMA 4X and UL94 5V.
- Use individually or chain units with each ranging from 40 to 60 feet away.
- Includes mounting brackets for installing the sensor to fence fabric.
- Screw terminals. Connect to digital input or RJ45 sensor port on an ENVIROMUX system. To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal. To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Powered by E-2D/5D/16D
- Operating voltage: 9-15V DC.