HDBaseT extender supporting HDR, HDMI 2.0 video standards and HDCP 2.2 encryption, the EX-70-H2X is designed for unrivalled compatibility with the very latest 4K Ultra HD content, sources and displays for unmatched point-to-point delivery of stunning HDR content.
With feature-rich Class A HDBaseT 5Play™, the EX-70-H2X handles all signal distribution needs in any environment where 4K UHD HDR video, 2ch PCM and multichannel audio up to 7.1, DTS-X/Dolby Atmos, bidirectional IR and RS-232, Ethernet passthrough and power is required along a single Cat6 cable over an distances up to 70m/230ft (4K).
Featuring an enhanced chipset to ensure compatibility with current and future UHD source devices, including those outputting 4K HDR content, the EX-70-H2 offers full compatibility with the latest UltraHD content and HDMI 2.0 video standards for transmission up to 4K UHD @30hz 4:4:4 24bit and 4K HDR at 24Hz 4:2:0 10bit (BT.2020).
With the ultimate convenience and ease of installation in mind, the EX-70-H2X features transmitter EDID adjustment, 2-way PoH to enable the EX-70-H2X to be remotely powered from either TX or RX, and a slimline chassis for discreet and flexible placement behind even the slimmest wall mount.
- Supports all high definition resolutions up to and including 4K UHD at 30Hz 4:4:4 24-bit, 4K HDR at 24Hz 4:2:0 10-bit (BT.2020)
- HDBaseT Class A transmission of 4K HDR up to 70m/230ft and 1080p at 60Hz 48-bit up to 100m/328ft
- Revised chipset increases compatibility with new 4K UHD source devices
- 5Play feature set including Ethernet passthrough and 2-way PoH
- Bidirectional IR and RS-232
- EDID adjustment on TX
- 2ch PCM audio up to 7.1, DTS-X and Dolby Atmos
- HDCP 2.2 compliant
- Transmits discreet wide-band two-way IR control signal / serial control commands together within HDMI signal over a single Cat5e/6
- EDID adjustment on transmitter (TX)
- Slimline chassis of 25mm for easier, more convenient installations behind screens at display zones
- 3D compatible
- Switchable RS-232 function mode on transmitter and receiver for firmware update
- Threaded bushings allow use of both standard and locking 18v DC power plugs
- Visual LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and HDBaseT link between devices
- Cable termination follows IEEE-568B standards
- Automatically adjusts feedback, equalization and amplification of signal for easy installation
- Energy efficient universal power supply included
- Included:
- 1x EX-70-H2X Transmitter
- 1x EX-70-H2X Receiver
- 1x 12V DC 2A Power Supply (US/UK/EU)
- 2x 2-pin Screw Down Phoenix Connectors
- 2x 3-pin Screw Down Phoenix Connectors
- 2x Wide-band IR Emitters
- 2x Wide-band IR Receivers (30-50KHz)
- 4x Mounting Brackets (1pr for TX and 1pr for RX)
- 1x Quickstart Guide