Fibre Optic Systems : Fibre Optic Receivers & Transmitters : Evertz - 7707VBxx-2-OC12

Dual SDI/ASI/SDTi + Ethernet SONET/SDH Fiber Transceiver, CWDM DFB Laser

Model: 7707VBxx-2-OC12

Transports signals at the OC-12/STM-4 rate
Single card TDM multiplexer for two bi-directional asynchronous SDI, DVB-ASI & SDTi signals
Built-in Ethernet transceiver with one 10/100/1000 Base-T compatible port with FBM (Fiber Bandwidth Management) technology
Interfaces directly to the SONET/SDH infrastructure
Signal transport over fiber uninterrupted by loss of any input feed

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

This dual SDI/ASI/SDTi + ethernet SONET/SDH fiber transceiver transports signals at the OC-12/STM-4 rate. It interfaces directly to the SONET/SDH infrastructure.

Transports signals at the OC-12/STM-4 rate
Single card TDM multiplexer for two bi-directional asynchronous SDI, DVB-ASI & SDTi signals
Built-in Ethernet transceiver with one 10/100/1000 Base-T compatible port with FBM (Fiber Bandwidth Management) technology
Interfaces directly to the SONET/SDH infrastructure
Signal transport over fiber uninterrupted by loss of any input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Stratum 3 wander/holdover/jitter compliance
Wide input frequency range tolerance (±50ppm)
Fully hot-swappable from front of frame
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
SC/PC, ST/PC, FC/PC connector options
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies two card slots and can be housed in the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity

Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Active Power: 10 Watt
DC Voltage: 12 Volts
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive
Serial Video Input - Standards: SMPTE ST 259-C, DVB-ASI, SMPTE ST 305
Serial Video - Number of Inputs: 2
Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization: Automatic to 250m @ 270Mb/s with Belden 1694 or equivalent cable
Serial Video Input - Return Loss: > 15dB up to 270Mb/s
Serial Video Input - Frequency Offset Tolerance: +50 ppm
Serial Video Output - Standards: SMPTE ST 259-C, DVB-ASI, SMPTE ST 305
Serial Video - Number of Outputs: 2 + 1 monitor with user selectable source
Serial Video Output - Connector: BNC per IEC 61169-8 Annex A
Serial Video Output - Signal Level: 800 mV nominal
Serial Video Output - DC offset: 0V ±0.5V
Serial Video Output - Rise and Fall Time: 900ps nominal @ 270Mb/s
Serial Video Output - Overshoot: < 10% of amplitude
Serial Video Output - Return Loss: > 12 dB
Serial Video Output - Wideband Jitter: < 0.2 UI
Serial Video Monitor Output - Standards: SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Monitor - Number of Outputs: 1 signal user-selectable from the 2 inputs
Serial Video Monitor Output - Connector: BNC per IEC 61169-8 Annex A
Serial Video Monitor Output - Signal Level: 800 mV nominal
Serial Video Monitor Output - DC Offset: 0V ±0.5V
Serial Video Monitor Output - Rise and Fall Time: 900ps nominal @ 270Mb/s
Serial Video Monitor Output - Overshoot: < 10% of amplitude
Serial Video Monitor Output - Return Loss: > 12dB to 270Mb/s
Serial Video Monitor Output - Wideband Jitter: < 0.2 UI
Optical Output - Standards: OC-12/STM-4
Optical - Number of Outputs: 1
Optical Output - Connector: Female SC/PC, ST/PC or FC/PC
Optical Output - Return Loss: > 14 dB
Optical Output - Wideband Jitter: < 0.2 UI
Optical Output - Fiber Size: 9µm core/125µm overall
Optical Output - Wavelength: 1270 to 1610nm Nm
Optical Output - Power: 0dBm ±1dBm
Optical Input - Standards: OC-12/STM-4
Optical - Number of Inputs: 1
Optical Input - Connector: Female SC/PC, ST/PC or FC/PC
Optical Input - Return Loss: > 25 dB
Optical Input - Wavelength: 1270 to 1610 Nm
Optical Input - Maximum Input Power: Standard: -1dBm
Optical Input - Sensitivity: Standard: -28dBm
Number of Slots: 2

Dual SDI/ASI/SDTi + Ethernet SONET/SDH Fiber Transceiver 52 kb - Data Sheet

Project List